Clean any unabsorbed superficial marks on the leather with the rubber block (accessory) provided. Rub the spot without too much pressure. Subsequently, use the Cleaning Cloth to remove any residue left by the application of the rubber. The Cleaning Cloth effectively removes stains and sedimented dirt from Nubuck leather, without leaving residue. In the absence of specific stains, gently clean the leather using a clean dry cloth or a soft brush, then protect the leather with the Water Repellent. Shake the bottle well and spray a light layer of the product uniformly over the entire dry and clean Nubuck leather item, from a distance of about 30 cm. Pay particular attention to protecting areas subjected to heavier use. Allow to dry after application for at least 1 hour. When the leather is dry, brush the surface with the brush provided to revive color and softness. The Water Repellent should be used consistently to ensure protection against soiling and to facilitate the cleaning of the leather. In the presence of accumulated or embedded stains caused by sebum, animal fat, oil, and food, apply the Degreaser directly onto the grease or oil stain and leave it to act for 6-8 hours. Once this time has passed, vacuum the area with a vacuum cleaner and then brush gently to completely remove the dust. For the most stubborn stains, it may be necessary to repeat the operation.